Category Archives: LinkedIn Learning

Not Just CAD! – January 2018 – 30 Years

So, here we are. Nearly at the end of the first month of another year. Christmas is done and the tree is outside looking a bit sorry for itself (awaiting recycling – save the planet, right?). New Year’s Eve has been and gone and Auld Lang Syne is just another memory.

I know this blog is late and there is reason for that. One is the awful lurghi that has been going around that provided me with a snot-filled Christmas and New Year whether I liked it or not, and two, January for me has been incredibly busy for once. and, hey, I also just wanted to get bedded in to the New Year this time too. I don’t know about everyone else, but it has been a struggle to get started this year. Anyone else felt like that about 2018?

Luckily, 2017 for me (and CADFMconsultants – www.cadfmconsult.co.uk) was a great year. Numerous courses for LinkedIn Learning (using Lynda.com content) were recorded, produced and released with another two trips to the LinkedIn offices in Carpinteria (often referred to as Carp). I was invited by Autodesk to be the AutoCAD expert on the AutoCAD booth at the inaugural Autodesk University London 2017 and I became an Autodesk University Speaker Mentor as well as being invited to become a member of the Autodesk Expert Elite program. Busy, huh?

For those of you that don’t know (and if you don’t, where HAVE you been?), I am an [in]structor for LinkedIn Learning, previously Lynda.com and I now have over fifty online courses in my online training portfolio. You can check them out at www.lynda.com and look me up there, Shaun Bryant. Or if you prefer to use LinkedIn Learning, look me up at https://learning.linkedin.com. My LinkedIn Learning author page is here. Both sites contain ALL my courses for you to learn from.

After reading this post, maybe drop me a line at shaun.bryant@cadfmconsult.co.uk. The first few who do and mention Not Just CAD! – January 2018 in their email subject line might get a nice little LinkedIn voucher that gets them some FREE learning!

So, about 2017….

The inaugural Autodesk University London 2017 was a scorcher in several ways. Firstly, I was made up to be the AutoCAD expert at the event (many thanks Tracy, Tanya and Jacqui!). Secondly, it was held on the HOTTEST two days of June 2017, which at Tobacco Dock in London (the event venue), made for insane temperatures as it is a glass-clad building! The event was a huge success and I was even Lynn Allen’s understudy as she could not attend the event due to illness. It was an honour to stand in for Lynn, Autodesk’s AutoCAD technical evangelist, teaching her two AutoCAD classes to the masses!

As 2017 progressed, there was the usual request for proposals for Autodesk University (AU) 2018, held in the delightful location of Las Vegas (sometimes known as Lost Wages), Nevada.

I was lucky enough to get one of my AutoCAD class proposals accepted and become a lab assistant for one of my good friends, who was also speaking, Paul Munford (CAD Setter Out – https://cadsetterout.com/). I was also asked to be an Autodesk University Speaker Mentor, where I mentored a novice speaker on how to create and submit their AU class presentation and handout, plus advise them on speaker techniques, taking advantage of my expertise and experience of being a veteran AU speaker. My mentee was Dr. Munirajulu from the Chennai area in India (https://www.linkedin.com/in/dr-munirajulu-m-3901a219). I had a great time imparting expertise and knowledge to him, and considering he had never spoken at AU before, he absolutely rocked his AU class too!

IMG_0208

As usual, towards the end of 2017, everything becomes about AU in Vegas, but I was lucky to get out to the LinkedIn offices in Carp in California the week before AU to record some of my online material. This is normally a relaxed (but busy) week and I was even able to get my five-kilometre walk along Carp State Beach in on the Sunday morning before I started recording in my little whisper booth on the Carp campus for the week. I love travelling to Carp too. I fly in to LAX and then take the Amtrak up the stunning California coastline from LA’s Union Station, which has the most beautiful architecture.

Carp was wonderful as usual, but sadly, due to the Thomas fire in December 2017, a lot of the stunning scenery has been burnt to a crisp and been decimated by the landslides that followed. Some of my LinkedIn colleagues lost their homes and the offices were close to being lost a couple of times too. The picture below gives you a good idea of how close the fires were to the Carp campus! Luckily, things are now moving back to normal, but there is a big clean-up operation and lots of rebuilding to do in the area.

LiL-Thomas Fire-Dec 2017

After my week in Carp, I flew out to Vegas from LAX for AU. I even bumped in to the bass player from an old eighties big-hair rock band called RATT who sat next to me on the plane and we chatted for the whole flight, sharing music anecdotes and war stories. The conversation even got around to which were the best guitar strings to use!

I got in to Vegas on the Saturday before AU, so I was able to chill out until the ‘insanity’ began on the following Monday. Being a seasoned AU attendee (this was my eleventh AU), I know the territory, so I got everything prepped and got ready to work the LinkedIn Learning booth in the AU exhibition hall. Have you ever been to a conference where ten thousand Autodesk geeks are all in the same place? Yep, that’s the ‘insanity’ I mean.

As an AU exhibitor, LinkedIn Learning were offering a 90-day free ‘pass’ for various Autodesk courses, mine included, so check out this link here, as the offer still stands until February 14th, 2018!

https://learning.linkedin.com/blog/whats-new/why-we-are-giving-away-40-autodesk-courses-for-free-for-90-days

AU kicked in and my class went well. Manning the LinkedIn Learning booth was busy, and we had a professional photographer taking portrait shots to enhance your LinkedIn profile!

IMG_0192

At AU, I also assume the role of an AutoCAD Influencer. This normally involves attending the Influencer food and drinks event at AU and getting to see something very cool related to design in AutoCAD. It is Autodesk’s way of saying thank you to all us AutoCAD’ers for all our work with AutoCAD over the years. This time it was not only getting to see the Cirque Du Soleil show, Ka (https://www.cirquedusoleil.com/ka), but also getting to go behind the scenes of the show the following morning! This was geek heaven for me. Not only was Ka an amazing show with incredible effects (including the free-floating stage), but it was ALL designed in AutoCAD too.

It was great to see all the AutoCAD Autodeskers there at the Influencers event, such as Shaan Hurley, Lynn AllenHeidi HewettRob McGuire, Marielle Covington, and Marcus O’Brien. Even longtime AutoCAD team member Jon Page came along. Thank you, AutoCAD team, for what was a wonderful evening watching Ka, followed by an amazing tour behind the scenes!

Finally in 2017, there was the thrill of becoming an Autodesk Expert Elite.

To quote the Autodesk website (https://www.autodesk.com/expert-elite/about) : –

‘The Autodesk Expert Elite program was created to recognize customers around the world who have contributed a significant amount of time, knowledge, and assistance to our customer support community. These people have demonstrated a strong sense of leadership and use an engaging style of collaboration that contributes to a healthy and valuable customer community’

There are over 400 Expert Elites in 53 different countries who use EVERY Autodesk product imaginable and I am thrilled to have joined their ranks. I was able to attend Expert Elite meetings and the Expert Elite Global Summit at AU and sit in the same room as Andrew Anagnost, the new CEO of Autodesk, and listen to what he has to say about the future of Autodesk and its software. As they say, the future is bright.

2018 is my thirtieth year of using AutoCAD (yep, you got that right – thirtieth). I started on AutoCAD 10 for MS-DOS at the tender age of eighteen (showing my age now…LOL) and I have seen AutoCAD go from a clunky, monochrome drafting system to a refined, capable design tool, that allows you in to work in both 2D and 3D and take your designs further, with interfaces that link seamlessly with other Autodesk products, enhancing the entire design workflow for just about every type of design and discipline imaginable.

I am proud to work closely with Autodesk, one of the biggest software providers in the world, and impart my knowledge of AutoCAD (and Revit) as an [in]structor on LinkedIn Learning to users all over the world. My passion is to educate and encourage learning. Learning never stops, and I can safely say that I still find things in AutoCAD that I did not know existed. Workflows that I have never noticed that can make you work smarter and faster. Shortcuts that make you that little bit quicker.

So, to celebrate my 30 years of AutoCAD, I am going to go and learn something new. A new challenge, a new string to my bow for 2018, using my LinkedIn Learning account. I sincerely hope that you will all do the same!

Here’s to a newly learnt skill for all of us in 2018. I hope you all have a great year, and if I bump in to you and any event, class or conference, say hello!

Happy learning!

SCB.

 

 

 

 

 

 

 

Advertisements

AutoCAD 2018: It’s here and here’s the new stuff….

As a member of the AutoCAD Blogger Council and a part of the AutoCAD Influencer team, I thought I should get some stuff out there about AutoCAD 2018 now that the embargo has been dropped!

Now, AutoCAD is a VERY mature product. So what can Autodesk do to AutoCAD to make it even better? Here are just some of the improvements and new features….

New DWG file format

Autodesk have released AutoCAD 2018 with a new AutoCAD 2018 DWG file format, so when you save a drawing using AutoCAD 2018 out of the box, it will save to the 2018 DWG file format. As quoted by Autodesk in the AutoCAD blog, the new 2018 DWG will improve the efficiency of open and save operations, especially for drawings that contain many annotative objects and viewports. So be careful if you upgrade and work on existing projects. Older versions of AutoCAD cannot read the 2018 format, so you will need to Save As to an older DWG format, or perhaps set your default Open & Save settings in Options? Just be careful with that one, as it is the first DWG upgrade since the 2013 DWG file format.

PDF SHX text support

When drawings and designs were exported to PDF using older shape code fonts (SHX), there was no support for the SHX text in the PDF and when PDFIMPORT was used to bring the PDF in to an AutoCAD drawing, the SHX text was converted to AutoCAD entities, such as polylines and arcs and the like. AutoCAD 2018 now provides SHX support when imported via a PDF, using the PDFSHXTEXT command. All you need to do is run the PDFSHXTEXT command, set the appropriate settings, select the AutoCAD entities that form the text objects and, hey presto, the entities become text.

External reference (XREF) path enhancements

How often have you had a broken external reference (XREF) filepath? AutoCAD 2018 provides some great new features that allow you to manage your XREFs much more effectively. Even when you have a new unsaved DWG file open (you know which one I mean, drawing01.dwg, right?), you can still XREF in another drawing in AutoCAD 2018. You can alter your reference path type from a relative path to an absolute path. You can also find and replace XREFs, which is very useful should newer versions of your existing XREFs need to be brought in to the host drawing.

Object selection

In previous versions of AutoCAD, you could select a group of objects with a window or crossing selection, then pan them off screen, and when you panned back to the original position in the drawing, those selected objects that were panned off the screen were deselected. Frustrating, right? AutoCAD 2018 now keeps those off screen objects selected, even if you do pan them off screen.

High resolution (4K) monitor support

AutoCAD 2018 now supports high-res monitors and screens making sure that the AutoCAD 2018 user gets the best possible experience on 4K displays and higher. Numerous typical AutoCAD user interface functions, such as the Start tab, Command line, palettes, dialog boxes, toolbars, ViewCube, pick pox, and grips, are scaled and displayed effectively using the 4K Windows setting.

On the surface, AutoCAD 2018 looks very much like AutoCAD 2017. The user interface is similar both in colour and layout, but surely that is what we want? I, for one, like the darker look and feel of AutoCAD, and I really appreciate the consistency and continuity of the user interface. Why re-invent the wheel and change it for changes sake? One thing I do like is that we have moved forward with the DWG version finally. It used to be a regular three year cycle for the DWG file format change, and improvements to the DWG can only be a good thing.

The subscription model is now also in full swing. I have just downloaded my version of AutoCAD 2018 over at http://manage.autodesk.com and it took no time at all over my fibre broadband. Sure I am spoilt with the fibre broadband, you may say, but the Autodesk Download Manager is much improved too. Use it where you can.

Overall, there are no big show-stoppers in AutoCAD 2018, but it is by no means a damp squib either. With the subscription model comes gradual, but regular, improvement to AutoCAD with subscription giving Autodesk the ability to roll out not only new releases but any service packs and hotfixes as well.

You can check out the official Autodesk AutoCAD 2018 blog here: –

http://blogs.autodesk.com/autocad/autocad-2018/

On a blatant self-promotional note, most of you know that I am an AutoCAD content creator for Lynda.com (slowly transitioning in to LinkedIn Learning) and you can find my AutoCAD 2018 Essential Training and AutoCAD 2018 New Features courses at the following websites: –

Lynda.com – https://www.lynda.com/Shaun-Bryant/4625210-1.html

LinkedIn Learning – https://www.linkedin.com/learning/instructors/shaun-bryant

Check out the courses if you wish, maybe even sign up to Lynda.com, or LinkedIn Learning not only for the AutoCAD 2018 titles but all of the other AutoCAD content available too!

SCB